The natural and refreshing harmony of Shodoshima’s light and wind satisfies visual product creation.
Since our factory was established, We have been responsible for precision machining of round bars, hexagonal bars,Forged products/Forged steel products.
We have an experience of processing not only special steel and stainless steel, but also heat-resistant steel and nickel alloy steel. Also we provide integrated production with the entire process up to shipping as one process, such as material ordering, cutting, cutting process, machining process, welding, assembly, inspection, packaging and shipping.
In particular, We receive high commendation from customers for various valves, pump stems, shafts, piping nozzles, and fall-off prevention rings (separation prevention rings)
In order to continue to make further progress and respond to the globalization of all fields, we will implement unmanned processing machines to achieve cost performance that meets customer needs.
- Location
- 2300-1 Kankakedori Chukyuu, Shodoshima, Shozu District,
Kagawa Prefecture
- TEL
- 0879-82-1103
- FAX
- 0879-82-1106
- Site area
- 5,000m²
- Building area
- 2,000m²
Introduction of Facilities
5 axis processing machine
With conventional machines, it is necessary to step on production requirements such as number of man hours to process multiple surfaces. But using a 5 axis processing machine, it is possible to consolidate processes, reducing total time and it can be finished with high precision.
| Type | Manufacturer | Product name |
Max. Machining Dia (mm) |
Max. Machining length (mm) |
Chuck size (inch) |
Penetration Diameter (mm) |
Remark |
|---|---|---|---|---|---|---|---|
| NC | DMG-Mori | NLX2000MC/500 | φ200 | 500 | 8inch | φ48 | Tailstock, Milling |
| NC | DMG-Mori | SL-25/B500 | φ250 | 500 | 10inch | – | Tailstock |
| NC | DMG-Mori | CL2000A | φ200 | 300 | 8inch | φ48 | Loader |
| NC | DMG-Mori | CL2000A | φ200 | 300 | 8inch | φ48 | Loader |
| NC | Takisawa | TCC-2000 L2 | φ200 | 185 | 8inch | φ63 | Cobot |
| NC | Takisawa | TCC-2000 L2 | φ200 | 185 | 8inch | φ63 | Cobot |
| NC | DMG-Mori | SL-25/B500 | φ250 | 500 | 10inch | – | Tailstock |
| NC | DMG-Mori | CL2000A | φ200 | 300 | 8inch | φ48 | Tailstock |
| NC | DMG-Mori | CL2000A | φ200 | 300 | 8inch | φ48 | |
| NC | DMG-Mori | NLX3000Y/700 | φ300 | 700 | 12inch | φ90 | Tailstock, Milling, Y-axis |
| NC | DMG-Mori | Dura2550 | φ300 | 513 | 10inch | φ80 | Tailstock |
| NC | DMG-Mori | Dura2550 | φ300 | 513 | 10inch | φ80 | Tailstock |
| NC | DMG-Mori | NLX2500MC/700 | φ300 | 705 | 10inch | φ80 | Tailstock, Milling |
| NC | DMG-Mori | SL-45/B1000 | φ500 | 1,000 | 18inch | φ95 | Tailstock |
| NC | DMG-Mori | NLX3000Y/700 | φ300 | 700 | 12inch | φ90 | Tailstock, Milling, Y-axis |
| NC | DMG-Mori | Dura2050 | φ350 | 530 | 8inch | φ73 | Tailstock |
| NC | DMG-Mori | NLX2500Y/700 | φ300 | 705 | 10inch | φ80 | Tailstock, Milling, Y-axis |
| Type | Manufactuere | Product name | Stroke(X,Y,Z) | Ramark1 | Ramark2 |
|---|---|---|---|---|---|
| NC milling | Otori-Kiko | BMC-400NC | 900×400×400 | NT50 | Index-chuck、 5-degrees-of-indexing |
| Type | Manufactuere | Product name | Stroke(X,Y,Z) | Ramark1 | Ramark2 |
|---|---|---|---|---|---|
| 5 Axis Machining | Yamazaki Mazak | VARIAXIS-J600 | 850×550×510 | BT40 | 4-axis-simultaneous, A-axis-indexing, ACT 30-pieces |
| Machining | DMG-Mori | SV-400 | 600×400×400 | BT40 | ACT 30-pieces, Index Chuck, 5-degrees-of-indexing |
| Machining | DMG-Mori | DuraVertical | 1050×530×510 | BT40 | |
| Machining | DMG-Mori | ecoMILL 1100V | 1100×560×510 | BT40 | Automatic tool setting, Center-through coolant |
| Machining | DMG-Mori | CMX1100V | 1100×560×510 | BT40 | Rotary Table, 4-axis-simultaneous + B-axis-indexing |
| Other facilitiies | Manufacturer | Number |
|---|---|---|
| Normal turning | Okuma | 1 number |
| Polyfizz Machine | Nitto-Polygon | 1 number |
| Drilling Machine | DMG-Mori | 2 number |
| Measuring Device | Manufacturer | Capability | Remark |
|---|---|---|---|
| 3D Measuring Device | Tokyo-Seimitsu | 300×200×200 | Grant of vision measuring function |
| Vision Measuring Device | Keyence | 300×200×75 | |
| 3D Measuring Device | Keyence | 600×300×200 | Type of handy |
| CAD CAM | Manufacturer | Remark |
|---|---|---|
| CAD CAM | Genetec |